Having an oil change Chicago can be frustrating. Not only can it be expensive but the car owner has to drive to the place and then hope that the people know what they are doing. For this reason it is a good idea to avoid this ordeal entirely and just do it at home.
The first step is to gather all of the things that will be necessary. This will include a new filter, as well as new oil. It is important to make sure the right kind is purchased. The next step is to find the drain plug on the pan, usually found towards the back of the engine. Place a container or dropcloth underneath to catch everything that comes out.
Then the person should loosen the drain plug which will allow the liquid to come out. Generally there is a bolt which must be removed with a wrench but this can vary from car to car, so make sure there is not a cartridge or filter element that also must be removed. Mechanics will tell you that losing the bolt into the container can make for a huge mess, so be sure to hold onto it.
Then the person should remove the filter. This can be the toughest part, as they are not always located in the same place. If it is hard to find just look around for something that looks similar to the replacement. Once it is located, twist it counterclockwise by hand, or by using a filter wrench to get it off. It is a good idea to put some oil in the new filter before putting it on to speed up the process.
The final steps are to screw on the new filter, put the plug back in and fasten it tightly. Be sure not to tighten it too much as the threads can easily be stripped in the process. Finally, just add some more oil at the fill hole located under the hood, checking the dipstick to make sure it is filled correctly.
Oil change Chicago does not have to be expensive or time consuming if the person just does it at home. By gathering the right materials and following these steps it should be easy. Do it yourself upkeep is one of the best ways to save money on car ownership. oil change chicago
The first step is to gather all of the things that will be necessary. This will include a new filter, as well as new oil. It is important to make sure the right kind is purchased. The next step is to find the drain plug on the pan, usually found towards the back of the engine. Place a container or dropcloth underneath to catch everything that comes out.
Then the person should loosen the drain plug which will allow the liquid to come out. Generally there is a bolt which must be removed with a wrench but this can vary from car to car, so make sure there is not a cartridge or filter element that also must be removed. Mechanics will tell you that losing the bolt into the container can make for a huge mess, so be sure to hold onto it.
Then the person should remove the filter. This can be the toughest part, as they are not always located in the same place. If it is hard to find just look around for something that looks similar to the replacement. Once it is located, twist it counterclockwise by hand, or by using a filter wrench to get it off. It is a good idea to put some oil in the new filter before putting it on to speed up the process.
The final steps are to screw on the new filter, put the plug back in and fasten it tightly. Be sure not to tighten it too much as the threads can easily be stripped in the process. Finally, just add some more oil at the fill hole located under the hood, checking the dipstick to make sure it is filled correctly.
Oil change Chicago does not have to be expensive or time consuming if the person just does it at home. By gathering the right materials and following these steps it should be easy. Do it yourself upkeep is one of the best ways to save money on car ownership. oil change chicago
No comments:
Post a Comment