Don't Go Out On A Long Road Trip Without Properly Preparing Your Nitto Tires

By Celina B. Giambrone


Each year, whether during summer vacation or during the winter holidays, many families like to take long drives to some fun and exciting destinations, but they cannot do so if their Nitto tires aren't in optimal condition. It doesn't matter if you're taking a three hour trip to visit some of your favorite family members or if you're taking a twenty hour drive to see some amazing national monument, you still have to make all of those vital preparations in order to have a safe trip. By skipping these critical steps, you could experience anything from a flat tire to a complete blow-out and be stranded beside the road for an indefinite amount of time, so pay close attention to the following steps and take none for granted.

One of the most important features of a tire is its ability to handle the weight of your vehicle by holding a certain amount of air pressure as you make your way down the road and to your set destination. Every car weighs more or less than most other models and comes with its own specific tire size, so in order to know exactly what amount of air pressure is required for your tires, you will have to check in the owner's manual of that specific vehicle. Before you even pull out of your drive way, you must get a pressure gauge and check the pressure in each tire, and if any of them are below the recommended amount for your vehicle, you will need to stop at the nearest service station and add the right amount of air to them.

If you plan on taking a long trip down the interstate, you are going to want to have full control of your vehicle, including a firm grip on the road, and such control is not possible if your tire treads are not in proper operating conditions. The last thing a driver wants to do is lose control of their vehicle during a long trip, and when you have a tire that has had all of its tread worn off, you will have less control of the vehicle. In order to make sure that each tire still has the proper amount of tread required for a safe journey, you should purchase a tread gauge, which is simply used to measure the thickness of the tread and let you know if you have enough left to make your trip.

One thing that can be super annoying when on a long drive is for your vehicle to pull to one direction or another or vibrate and handle very poorly, because this can make it more difficult to drive and lower your fuel economy. Anytime you have to put up with such things, it is very likely that your tires are not properly balanced and that your treads have been unevenly worn, but a balance and rotation job before you hit the road should do the trick just nicely.

New Nitto tires aren't going to come with these sort of problems, but you should still make these same checks before your trip, to get into the habit of doing so if nothing else. So make all the inspections, keep an eye on your tires, and have a good journey.




About the Author:



No comments:

Post a Comment